Acryl Putz GK42 Contact Polymer Primer
| Efficiency: | depending on the surface absorptiveness - to 10 m²/l |
| Container: | 1 l bottle, 5 l container |
| Consistency: | ready-to-use |
| Warranty period: | expiry date and batch number: on the container |
Acryl Putz GK42 Contact Polymer Primer
PRODUCT DESCRIPTION:
ACRYL-PUTZ® GU40 Universal Polymer Primer enhances adhesive properties and contributes to proper drying of later applied products. It prevents from releasing water to the surface too quickly and penetrates deep into it as well as binds loose aggregates. It provides light satin, transparent and water vapour penetrable layers
APPLICATION:
ACRYL-PUTZ® GU40 Universal Polymer Primer is recommended to be applied on putties, paints, mortars and levelling products for ceilings, walls and floors either outside or inside of premises.
Polymer formula
ACRYL-PUTZ® GU40 Universal Polymer Primer consists of special double system of resins which bind excellently elements of the surface and reinforce its structure.
It penetrates deep the structure of the surface
ACRYL-PUTZ® GU40 Universal Polymer Primer is excellent in the case of very absorptive, weak and loose surfaces which require deep penetration, made of the following; brick, cement, lime, cement and lime, gypsum, concrete and plaster cardboard panels etc.
Surface preparation
- surface must be solid, dry, seasoned and free of dust, grease and any contamination as well biological corrosion (fungi, moulds, moss etc).
Product preparation
- the product is to be mixed and not thinned
Application
- the product is to be applied by paintbrush, roller or hydrodynamic spraying at the air and surface temperature from +5ºC do +25ºC,
- damp patches and puddles are forbidden
- on very absorptive surfaces or very weak it’s recommended to apply another layer of the product on penetrated and almost dry first layer
- it’s allowed to perform further finishing works after 24 hours, when priming works were completed
- in the event of outside application, the works mustn’t be performed during bad weather conditions
- after the works have been completed it is necessary to wash the tools by water.
show more show less