ACRYL PUTZ® LIGHT

ACRYL PUTZ® LIGHT - Superlight and fast-drying finish putty

PRODUCT DESCRIPTION:

ACRYL-PUTZ® LT22 LIGHT is a ready-to-use finish putty of broad spectrum of applications. It is particularly recommended to fill in scratches, fractures, cracks and perform joints regardless of the kind of surface.

APPLICATION:

ACRYL-PUTZ® LT22 LIGHT is designed for fixing walls, ceilings and plaster cardboard panels. It is also excellent for moulding made of gypsum and polystyrene as well as wood.

Superlight

ACRYL-PUTZ® LT22 LIGHT is a ultramodern finish putty – the novelty on Polish market. It is light enough (density 0,4 g/cm³). Thanks to its superlight weight it has special physiochemical properties.

Fast-drying

ACRYL-PUTZ® LT22 LIGHT it is highly recommended to fill in any kind of fractures which require fast repair. It can be painted just after two hour after application.

Surface preparation

• Soothing-down surface must be solid, dry, dust, grease and contamination free
• Very absorptive and weak surfaces must be primed by ACRYL-PUTZ® GU40 POLYMER UNIVERSAL PRIMER or ACRYL-PUTZ® GP41 DEEP PENETRATING POLYMER PRIMER, depending on surface absorptiveness degree. Metal elements must be primed by anticorrosive base.

Product preparation

• In the event of too dry consistency it is recommended to add small amount of pure water.

Application:

• Smoothening-down works are to be carried out at the air and surface temperature from +5ºC to +30ºC
• Putty is to be applied by stainless steel float by pressing so that the putty fills in a crack carefully and stick to its sides.
• In the event of massive roughness the application is to be repeated after the previous layer has thickened or by ‘wet to wet’ method.
• Dry surfaces are to be grinned by sandpaper or net and dedusted and painted (recommended sandpaper – 150)
• After the works have been completed it is necessary to wash the tools by water.

Caution

• Paint only after drying.
• In the event of using solvent paints, wait 24 to 48 hours before application